Product Details:
|
Material: | PP | Length: | 10", 20", 30", 40" |
---|---|---|---|
OD: | 69mm | Micron: | 0.1um, 0.22um, 0.45um, 0.65um |
Filter Area: | 0.6-0.7 Square Meter | Max. Operating Temperature: | 80 ℃ |
Flowing Hot Water Sterilization: | 85℃/30min | ||
Highlight: | 69mm melt blown polypropylene filter,0.22um melt blown cartridge,69mm pp melt blown filter |
Ordering Information
HPPV 0500 10 C1 S
Series | Micron | Length | End Cap Type | Seal Material | ||||||
0050 | =0.5μm | 1000 | =10μm | 05 | =5" | C1 | =226/Spear | E | =EPDM | |
0100 | =1.0μm | 2000 | =20μm | 10 | =10" | C3 | =222/Spear | S | =Silicone | |
HPPV | 0150 | =1.5μm | 4000 | =40μm | 20 | =20" | C5 | =222/Flat | V | =Viton |
0300 | =3.0μm | 7000 | =70μm | 30 | =30" | C9 | =DOE | |||
0500 | =5.0μm | 9000 | =90μm | 40 | =40" |
HPPV series filter cartridges are made of multi-Drainage Nano-fiber materials with high dirt holding capacity under reasonable gradient structure design. The multi-stage interception characteristic of gradual pore diameter from thick to fine makes the filter cartridge have stronger pleated capacity, can effectively improve the problem of rapid surface blockage, greatly prolong the service life of the filter cartridge, and is very suitable for filtration of high suspended particles, colloidal substances and high viscosity liquid.
Features and Benefits
The polypropylene filter structure with gradual pore diameter has excellent pleated capacity and low flow resistance
Extensive chemical compatibility, suitable for filtering various acids, bases and solvents
The accuracy range of 0.5-90 m can meet the requirements of various filter precision, with a wide range of application
Applications
Beer fine filtration
White wine to remove turbidity filter
Tea filtration
Juice extract filtration
Product Material and Technical Parameters
Filter Media | Polypropylene |
Support/Drainage | Polypropylene |
Core/Cage/End Cap | Polypropylene |
Maximum Operating Temperature | 80°C |
Maximum Operating Differential Pressure |
4.0 bar / 21°C 2.4 bar / 90°C |
Maximum Reverse Differential Pressure | 2bar/21℃ |
Steam Sterilization Hot Water Sterilization |
121℃/30min, 85℃/30min |
Filter Area | 0.6-0.7㎡/10’’ |
Biological Safety |
Every 10 inches of dissolved matter <30mg Endotoxin<0.25EU/ml |
Contact Person: Lucy
Tel: 86-21-57718597
Fax: 86-021-57711314